Cumbersome control panels and bulky wiring are now a thing of the past. With patented IP-to-the-door technology, ISONAS offers something that others in the industry cannot—pure IP access control. Our innovative solution is easier to install and manage, ultra-flexible to match your changing needs and more cost-effective over time. We've installed over 20,000 readers for organizations worldwide—from education and healthcare institutions, to state and local governments, to Fortune 500 companies. Now let us help yours.

<><>Proven Innovation<><>
Our patented PowerNet™ reader-controller provides the first “pure IP” to the door solution that eliminates the need for a separate power supply, control panel and dedicated hard wiring.

<><>Greater Value<><>
Compared to traditional systems that require more equipment, labor and maintenance, the total cost of ownership is far less.

<><>Total Flexibility<><>
The ability to easily integrate with other systems and go where other access control solutions can’t, and gives you the freedom to adapt to changing needs.

Isonas ----PowerNet IP Bridge!!!!!!!

Isonas PowerNet IPBridge

PowerNet IPBridge

2-Door Model – PN: IPBridge-2

3-Door Model – PN: IPBridge-3

<><><><>Avoid rip and replace. Easily and cost effectively expand legacy systems to seamlessly operate within an ISONAS Pure IP environment. The PowerNet IP Bridge connects the modern IP-network world and legacy Wiegand installations. Traditional and IP enabled panels can be replaced by simply unplugging existing panels and attaching Wiegand readers directly to the IP Bridge. Two and three door configurations allow you to match the exact number of doors you are taking over. The PowerNet IP Bridge connects legacy systems and new installs of PowerNet reader-controllers to operate as one system using a single credential.<><><><>

Why use the IPBridge:
 Eliminates the need to rip and replace existing hardware to upgrade system
 Leverages existing IT network and legacy security infrastructure
 Seamlessly allows migration to a Pure IP Access Control Solution
 Creates a flexible solution to grow with future needs
 Scale from 1 access point to 1,000s on a single server

Features of the IP Bridge:
 Direct IP-Network connectivity
 Supports both Power Over Ethernet (PoE) and PoE-Plus
 Open System -- Ethernet network appliance
 Supports standard door hardware, including Wiegand readers.
 Dual port allows interconnection of multiple IP Bridges

For More Information and Isonas PowerNet IP Bridge Specifications, Click Here.

Isonas PowerNet IP Reader - First "Pure IP" solution

Isonas PowerNet IP Reader-Controller

-------------------------------------------------------------------------------

The PowerNet RC-03 is an all in one reader and controller device that provides the first “pure IP” solution to the door and eliminates the need for a panel. The device is easy to install and connects through your Ethernet connection without the need for additional power at the door. It provides uninterrupted decision–making intelligence even if your network goes down. Having a single PowerNet per access point makes your entire network easily scalable one door at a time and allows you to do more with less.

IP Power Net

PN: RC-03 PRX

PN: RC-03 PRX K

PN: RC-03 MCT

PN: RC-03 MCT K

Built In Intelligence

With over 64,000 permissions, 5,000 events and 32 time zones able to be stored on each PowerNet the unit functions independently and prevents a single point of failure.

True Network Device

Our “call home” feature seamlessly connects to the host computer creating a simpler installation.

Software

Crystal Matrix Software is included with the price of the reader; there are no additional licensing fees and an unlimited number of users. Advanced features are available such as elevator controls and tenancy.

Scalability

Manage thousands of reader-controllers on a single computer across a geographically disbursed network.

Proximity & Multi-Card Versions

Proximity is the most commonly used technology in the market, but our Multi-Card Reader(MCT) is compatible with smart cards(MiFare, iClass, PIV)

Enhanced Security

AES 256 bit encryption and our Exterior Door Kit(EDK), data between the reader and the host remains

Adaptable

The Open Systems platform enables seamless integration with other systems, including SQL, TCP/IP. The powerful integration with Video Management Systems allows a fully comprehensive security solution.

Multiple Access Point Control

Control up to 4 cabinet doors with a single reader-controller

For PowerNet IP Reader-Controller Specifications,

Click Here.po

The **NEW** Sarix™ IL10 Series Mini Box and Micro Dome Camera by PELCO!!!!!

Pelco presents:

The *NEW* Sarix IL10 Series Mini Box and Micro Dome Camera!

      

The new Sarix™ IL10 series mini box and micro dome cameras are high-definition, cost-effective IP network cameras perfect for most any indoor fixed video security application.

The Sarix IL10 Series box and dome cameras are high-definition IP network cameras that offer a cost-effective solution for video security needs in small- and medium-sized businesses. They are part of the Pelco Value (V) range of cameras. IL10 Series cameras produce high-quality, color HDTV (720p resolution at 30 ips) video.

Features

• 720p (1,280 x 720) resolution
• 30 images per second (ips)
• H.264 compression
• Up to two simultaneous video streams                                                                       
• Selectable bit rate
• Minimum illumination down to 0.5 lux
• Integrated 68° field of view lens
• Power over Ethernet (IEEE 802.3af) or 24 VAC options                             
• ONVIF Profile S conformant

Benefits

• Easily integrates with third-party video systems
• Affordable, cost-effective, high-quality cameras
• Quick, easy installation
• Web-based user interface for easy setup and configuration
• Choice of PoE or 24VAC power
• One-year warranty and support from Pelco by Schneider Electric

Applications

• Retail, Education, Healthcare, Business Centers, Residential
• Any indoor application where cost-effective, quality HD surveillance video is needed

No Phone Charge Intercom System---Model 6000D--- TRIGON ELECTRONICS, INC

Trigon Electronics, Inc. Model 6000D

Trigon's Model 6000D is the only single intercom system that allows automatic detection of TELCO service and automatically adjusts itself accordingly to allow uninterrupted service for the user.  Multi-resident buildings can now offer doorman/concierge services free of telephone company tolls and line charges. The Trigon Model 6000D is an automated switch system for use with entry control telephones-either programmable dialers or doorman stations.  It turns any resident's telephone into a door intercom station. Multi-resident sites can now offer Doorman/Concierge services free of telephone company tolls. 

The system installs in the structure's telephone room where it connects directly to each resident's telephone line. Connections are made via standard telephone company blocks to assure normal telephone services. The system is comprised of easily serviceable circuit cards mounted in space-efficient racks and sturdy cabinets.

The Model 6000D provides a wide level of features including call-waiting and custom programmability.

	PATENT PENDING automatic switchover for all users - regardless of telephone service type (VoIP, Cable, Cellular etc.)
	Provides "No Phone Charge" resident controlled guest access for apartments, condominiums, and more…
	Perfect for high rise sites with Doorman or Concierge services.
	One 6000D can support up to 1000+ units.
	Utilizes resident's standard telephone as a door intercom station.
	Allows entrance to resident and resident to entrance intercom.
	System handles up to eight (8) voice intercom entrances
	Supports eight (8) simultaneous entrance calls.
	Generates both "entrance call waiting" and "outside call ringing".
	Programming through TriCom 3.0 direct computer link or optional modem connection
	This unit comes with a power source to generate ring tones for those residents that do not have home phone service and use their cell phone as a primary phone. (click above for manual)

VERIS INDUSTRIES PRESENTS THE E50F5 LON DIN RAIL METER WITH DATA LOGGING!!!!!!!

>>Veris Industries's  E50F5 LON DIN Rail Meter with Data Logging combines exceptional performance and easy installation to deliver a cost-effective solution for power monitoring applications. Native serial communication utilizing LonWorks protocol (ISO/IEC 14908-1 Control Network Protocol) via a LON TP/FT-10 communication channel provides complete accessibility of all measurements to your Energy Management system   The data logging capability protects data in the event of a power failure. The E50F5 can be easily installed on standard DIN rail, surface mounted or contained in an optional NEMA 4 enclosure, as needed. The front-panel LCD display makes device installation and setup easy and provides local access to the full set of detailed measurements.  Two pulse inputs provide an easy way to incorporate simple flow sensors to track gas, water, steam, or other energy forms using a LonWorks building automation system in addition to full monitoring of electrical energy.<<

APPLICATIONS:

• Energy monitoring in building automation systems
• Energy management
• Commercial sub-metering
• Industrial monitoring
• Cost allocation

FEATURES:

• LonMark Certified
• DIN rail mounting option...easy installation
• ANSI 12.20 0.5% accuracy, IEC 62053-22 Class 0.5S...great for cost allocation
• Real energy output and phase loss alarm output...one device serves multiple applications
• 90-600 VAC...application versatility with fewer models to stock
• Bright back-lit LCD...easy visibility in dark enclosures
• Data logging capability...safeguard during power failures
• Compatible with CTs from 5A to 32000A...wide range of service types
• User-enabled password protection...protect from tampering
• System integration via LonWorks protocol...convenient compatibility with existing systems
• Native LON TP-FT-10 support (no gateway required)

Inputs:

• Control Power, AC: 50/60 Hz; 5VA max.; 90V min.; UL Maximums: 600V L-L (347V L-N ); CE Maximums: 300V L-N (520V L-L )
• Control Power, DC: 3W max.; UL and CE: 125 to 300VDC (external DC current limiting required)
• Voltage Input: UL: 90 V L-N to 600 V L-L ; CE: 90 V L-N to 300 V L-L
• Current Input
• Scaling: 5 A to 32,000 A
• Input Range: 0 to 0.333 V or 0 to 1 V (selectable)
• Pulse Inputs: Two sets of contact inputs to pulse accumulators

Accuracy:

• Real Power and Energy 0.5% (ANSI C12.20, IEC 62053-22 Class 0.5S)

Outputs:

• Serial Communication: LonWorks protocol (ISO/IEC 14908-1 Control Network Protocol) via a LON TP/FT-10 communication channel

Mechanical:

• Mounting: DIN Rail or 3-point screw mount, NEMA 4 enclosure optional

Environmental:

• Operating Temperature Range: -30° to 70°C (-22° to 158°F)
• Storage Temperature Range: -40° to 85°C (-40° to 185°F)
• Humidity Range: <95% Relative Humidity, noncondensing

ISONAS POWER-NET IP READER CONTROLLER<<>> THE FIRST PANEL FREE CONTROLLER WITH POWER OVER ETHERNET!!!

The **FIRST** panel-free IP Reader Controller with Power Over Ethernet: 

POWER-NET IP READER CONTROLLER by Isonas.

ISONAS PowerNet™ Reader is the first, panel-free, IP reader-controller with Power Over Ethernet. The unit is shown here with the optional integrated keypad. Install an unlimited number of readers with no panels or hubs to worry about. PowerNet’s pigtail used for connecting auxiliary devices, electronic strikes, REX buttons etc. Pigtails are available in the lengths of 4', 10' and 25'.

Bundled with Crystal Matrix Software: 

>> Optional keypad available 

>> Connector replaces hardwired pigtail 

>> Power Over Ethernet (PoE) built in 

>> Power the electronic strike from the reader (.6 amp output) 

>> Potted for greater weather resistance

>> ISONAS and HID Proximity cards supported by the Proximity        Model

>> MultiTech support Proximity and Smart cards such as Mifare, iClass, DESFire,…

Reader-Controller Options:

+ Proximity                                    RC-03-PRX

+ Proximity & Keypad                    RC-03-PRX-K

+ MultiTech                                   RC-03-MCT

+MultiTech & Keypad                   RC-03-MCT-K

Specifications:

Dimensions

1.625” X 6.750 X .940”

Weight

7oz.

Operating Frequency 

125 kHz (dual modulation, FSK & ASK)

Power Options 

PoE, 12 or 24 Volts (field selectable)

<125 mA at peak at 12V

Read Range 

2”-5” typical on RFID cards

Operating Temperature 

Meets FCC part 15 certification

UL-294 and rated for outdoor use

-40°C to 50°C, humidity 0-100%

Construction 

Polycarbonate blend, UV stabilized

Potted for greater weather resistance

Inputs/communication interface 

Ethernet, TCP/IP, Standard RJ45

RS-232 interface

3 monitor inputs

Outputs 

12 wire pigtail, detachable

2 TTL (active high)

1 Lock control circuit (NC & NO supported)

Power output, 0.6 amps at 12V

Stand-alone ability 

Stores 64,000 cardholders

5000 events

32 time zones

Security Features 

Optical tamper switch

Power-up diagnostics

AES-256 bit encryption

Visual Indicators 

Two LED signals for reader status

Network LEDs for status

Color 

Dark grey

ISONAS IP Access Control Integration Abilities

ISONAS IP Access Control Integration Abilities:

ISONAS provides and supports multiple interfaces that can be used to integrate ISONAS hardware and systems with other products and environments. Here is a brief overview of those interfaces and how they can be used.

1. ISONAS TCP/IP Interface (TCP/IP) – The TCP/IP interface is the easiest and most flexible interface available. Use this interface if you want to utilize the standard ISONAS Crystal Matrix software suite to configure and control the access control system and in addition want to have other programs monitoring and controlling the ISONAS reader-controllers. This interface has been used by systems such as VMS systems, college student enrollment systems, and human resource systems. These other programs communicate with the ISONAS software using plain text TCP/IP messages.
   
   
2. AD-Bridge – The Crystal AD-Bridge supports automatically synchronizing user data between the customer network’s Microsoft Active Directory and the Crystal Matrix software suite.
   
   
3. Modbus/TCP – The interface allows you to leverage COTS (Commercial Off The Shelf) hardware to control and monitor general-purpose inputs and outputs. Inputs such as extra door sensors and roof hatches. Outputs such as elevator controls, or external lights.
   
   
4. ISONAS Proximity SDK – Use this if you want to write programs that directly drive and manage ISONAS reader-controllers and will not be using the ISONAS standard Crystal Matrix administration and monitoring programs. ISONAS requires that you sign a nondisclosure document in order to receive the documentation of this interface.
   
   This SDK handles device orders/responses (hexadecimal byte data streams sent to and received from the ISONAS reader-controllers). These can be sent/received directly to the PowerNet reader-controllers. They can be sent from any hardware/software environment that is capable of handling standard TCP/IP socket communications.
   
   
5. ISONAS ASCII Interface (IsoASCII). This interface provides an ASCII file input mechanism that can be used to configure and program the ISONAS system. To use the interface, you simply write data to an ASCII file. The interface picks up the data from the file and uses it to configure and program the ISONAS system.
   
   
6. Logging and SNMP Interface – this interface provides the ability to report all events that occur within the access control system using any or all of three reporting mechanisms:
   • Generate a standard SNMP (Simple Network Management Protocol) trap event
   • Log the event to an ASCII text file
   • Invoke execution of a specified program
   
   
   
7. ODBC – the internal database that ISONAS has used for the access control system is a very compact, high performance and reliable product from SoftVelocity corporation. It is a full function relational database and has an ODBC compliant interface.
   
   
8. Destination Dispatch – Directly interface to the ThyssenKrupp Destination Dispatch advanced elevator control system.

Mamac Systems- Ethernet over Power-line Bridge!!!

Mamac Systems has produced the IP-PLE-85 Over Powerline Bridge!!

Mamac's IP-PLE-85 Bridge converts any line voltage power outlet into a ethernet network connection. No software to load, no configuration, no training or setup; just plug it in and connect any ethernet device with a standard CAT-5 patch cord. The bridge can also be used to extend the range of wireless 802.11 ethernet networks.

The IP-PLE conforms to IEEE 802.3i 10BASE-T and IEEE 802.3u 100BASE-TX standards and provides a fast 85 Mbps ethernet connection. IP-PLE-85 is a low cost, environmentally friendly solution for networking Mavericks or any other ethernet device in schools, colleges, office buildings, shopping centers, strip malls, homes or any other commercial, retail or residential application.

Specifications:

Interface:      1 RJ-45 10/100M Ethernet      1 Powerline Plug

Standards:           CSMA/CA MAC Control

Modulation:   OFDM, DQPSK, DBPSK, ROBO   Carrier Modulation Support

Frequency Band: 4.3 MHz to 20.9 MHz Band

Security:               56 bits DES Encryption

Data Rate:            Up to 85 Mbps

Environment: Temp: 32°-122°F (0°-50°C) Humidity: 10 - 90% RH non-condensing

Conformance: CE certified, FCC certified and RoHS compliant

Trigon Electronics, Inc. Presents the HF-MINI!!

Trigon Electronics's HF-MiNi

Telephone Entry/ Auto - Dialer

Trigon's HF-Mini is a telephone entry unit that is a single number auto-dialer. When the button is pushed, the unit begins dialing. The HF-Mini is normally 12 VAC powered, but will automatically transfer to phone line power if the utility power fails. The person who answers the call then takes control of the relay. The relay is then used to remotely control entrances, lights, cameras, etc. Flush mount plate mounts to a standard 2 Gang box.

Features:

>>One 24 digit resident telephone number.

>>Called party disconnect.

>>Vandal resistant call button.

>>One normally open/normally closed 5 amp

form C relay.

>>Double-baffled water proof speaker.

>>Low noise Microphone housed in a shock

resistant chamber for enhanced reliability.

>>Up to five (5) entry phones can share the

same telephone line

>>Programmable ring count, gate time, call

time, and gate opening tone.

>>Ring down mode available

>>Normally 12 VAC powered with phone line

power backup.

>>Will run continuously on phone line power,

but will not close the relay.

>>Red flashing and steady ADA light.

Applications:

<<Allows entrance for anyone whom

does not normally gain entrance or

does not have a key.

<< Allows contact for offices after hours.

<< Use to call security after hours for employee escort

Operation:

When the button is pushed, the HFMini calls a programmed telephone

number.

When the call is answered, the resident has the choice to grant entry

with their keypad or deny entry by

hanging up

Specifications:

::Design - Hands-free auto-dial telephone

 ::Capacity - One number, up to 24 digits in

length.

::Programming - Remote via touch tone telephone.

::Power - 110V/12VAC, 20A, Class 2 transformer

included.

::Output Rating: Power Relay: 5 amps @ 12 VDC

or 1 amp @110VAC.

::Output Duration - Programmable, momentary

up to 45 seconds.

::Telephone Line - Standard touch tone. Compatible with most PBX analog ports.

::Mounting - Surface with flush or pedestal mounts

available.

::Construction:

::Non-corroding #316 Stainless Steel

weather resistant wraparound enclosure

with back box and tamper resistant security screws.

::Operating Temperature: -5ºF to +120ºF.

Plexidor Electronic Dog Doors!!

Plexidor® Electronic dog doors only open for your pet, while keeping   other animals out. 

The collar key is an el.ectronic RFID (radio frequency identification) that is attached to your pet's collar. The door reads the key code as your dog approaches and if it recognizes the code, it slides up like a mini garage door, allowing access for your pet. You can program the key to accept just one of thousands of possible key codes, so it is very secure. The rugged electronic collar keys do not require batteries, are water and shock proof, and also work with underground fencing and household security systems.

We have models for both door mounting and wall mounting to suite dogs up to roughly 125 lbs in size. The main frame has a low profile of just 1 5/8" in thickness. Door plugs into household outlet or can be hardwired. Both models are available in 2 colors: white or brown.

All models come complete with pet door, exterior trim, stainless steel hardware, 2 collar keys, power supply and 15ft cord, and are backed by our industry leading 90-day satisfaction guarantee and 5-year no-hassle warranty! 

Plexidor® Electronic Advantage

>>Secure - Interior stainless steel locking bar, thousands of key codes. Opens only for your pet. Tough shatter resistant panel. Heavy, thick aluminum frames that won't bend. Won't interfere with home security systems.

>>Energy Efficient - No Gaps for air infiltration, saves you money.

>>Pet and Child Safe - Panel won't close when obstructed. Total control up and down. No pinched tails. No pinched fingers. Panel will not free fall with power failure.

>>Dependable - Runs on household current. Collar key is waterproof and does not need batteries. Key fastens securely to collar. Interior mounted motor will not freeze up in cold.

>>Durable - Steel and hardened aluminum frame with thick acrylic closing panel. Wall units include aluminum tunnel pieces and stainless steel mounting hardware for years of service. No unsightly rust streaks on your home.

>>Easy to Use - One button programming to add or change collar codes quickly and simply. Collar key snaps on easily and stays on. Comes complete with pet door, exterior trim, stainless steel hardware, 2 collar keys and power supply with 15ft cord.

>>Available Colors - White and bronze baked on finish. 

>>Optional Wall Unit - Made of all aluminum and stainless steel for years of service.