5.27.2009

Myths about PoE

source: midspans.com

Power-over-Ethernet (PoE) technology integrates power and data across standard Cat5/5e/6 network cabling and provides more flexibility in today’s workplace. PoE enables power to be supplied to network devices, such as IP phones, network cameras, and wireless access points through a single, most often existing, network cable. When combined with an uninterruptable power supply (UPS) a PoE network delivers continuous operation and minimizes business downtime by eliminating most power interruptions. With the ability to install endpoints in any location PoE technology provides a scalable and flexible networking infrastructure geared for growth and efficiency.


Myth #1: PoE Switches can provide all the power I need or will need.

Today most switches are merely PoE-enabled. This means the majority rely on power management to share available power across the switch ports. The switches are designed with a smaller power supply that is typically capable of powering the switch itself and providing the required 15.4 watts of power over a limited number of ports.

For example: A 24-port PoE Switch with power management typically has a 195-watt power supply. After the 40 watts needed to power the switch, you have approximately 155 watts remaining. If 12 of the 24 ports are used to connect end devices using 11.5 watts each, you would only have 17 watts remaining to provide power on the last 12 ports. The math doesn’t match the ports: 195W – 40W (switch) – 138 (12 devices @ 11.5W/ea) = 17W left for power on 12 ports

Myth Busted: A PoE Switch is often not the best and most cost effective solution.

-------------------------------------------------------------------------------------------------

Myth #2: A midspan and a PoE switch are the same.

A PoE Midspan is not a switch. A Midspan is an additional PoE power source that can be used to offer full power to all endpoint devices. PoE Midspans (Power Hub or Power Injector) pass data from a switch and ‘inject’ safe power acting as a patch panel of sorts. Midspans are commonly used with either a non-PoE switch, an existing PoE switch, or a new PoE switch in a network. In addition to offering full power across all available ports, midspans costs substantially less per port and overall than a new PoE enabled switch.

Myth Busted: Midspans do not switch – they make use of existing best-in-class switches. They inject safe power across all ports and cost less than PoE switches.

-------------------------------------------------------------------------------------------------

Myth #3: Only a switch that has PoE built in should be used to power devices like IP Phones, Access Points, and IP Security Cameras.

Switches were designed to, well, switch. PoE Switches are designed with power management and have to distribute different power as required to ports but there is often not enough power for all devices plus the power required to complete the primary task - switching. Networks that have multiple devices like IP phones, IP cameras, wireless access points quickly go beyond the limited capacity of managed power PoE switches. As more PoE devices continue to grow in capabilities and market share this managed power limitation will become more and more evident. Midspans, in contrast to switches, were designed to provide full power on every port and deliver safe and reliable power based on the industry standards (IEEE802.3af/at).

Myth Busted: Rather than relying on power management in a switch use a midspan that can deliver full power (15.4W) to every port for all PoE-enabled devices now and in the future.

-------------------------------------------------------------------------------------------------

Myth #4: Ethernet devices not PoE-enabled (non 802.3af/at compliant) cannot be powered using PoE technology.

Many devices do not directly accept Power-over-Ethernet but can still use PoE technology. If the device uses less than 12.5 watts (802.3af) or less than 50 watts (802.3at+) and connects to an IP Ethernet network you can use a PoE splitter. PoE splitters enable you to accept PoE power from any IEEE 802.3af/at compliant switch or midspan then separates the data and power on to two seprate cables. The data is connected to the end device through a standard RJ45 plug while the power is connected using a standard 5.5 x 2.1 x 12mm Adapter Plug. Splitters can also convert the input voltage to the required voltage for a non-PoE device. Splitters are traditionally used with older network products which only accept power through their (DC) jack and data through their RJ-45 jack.

Myth Busted: PoE splitters can be used in conjunction with PoE midspans and switches to provide both the data connectivity and power required by most endpoint devices.

-------------------------------------------------------------------------------------------------

Myth #5: I need/will need additional PoE switch ports to power my IP cameras and high-power pan, tilt, and zoom (PTZ) cameras.

Today, many devices have evolved into more advanced solutions with higher power requirements. The traditional approach was to endure a “forklift upgrade”. This meant buying new PoE switches at considerable cost and physically swapping out the existing switches to meet higher power requirements or add more powered ports. There is an easy and more cost-effective way – separate the data and power in the wiring closet (IBF). It is more efficient and costs less to separate your data and power allowing you to keep your best-in-class business switch for your IP needs and supplement it where required with best-in-class midspan technology to power the endpoints.

Myth Busted: A PoE Switch is often not the best and most cost effective solution.

-------------------------------------------------------------------------------------------------

Myth #6: All midspans are created equal . . . they are all the same.

Always select a best-in-class midspan. If you wanted to enhance your switched network wouldn’t use a best-in-class network switch? Of course you would. A midspan designed and manufactured by a leading power supply company that understands power, power requirements, and one that delivers enterprise-level solutions.

Select a midspan manufacturer that has multiple members on the IEEE (PoE) committee helping to define safe, new PoE standards. This ensures that every midspan is designed to meet current and future IEEE specifications for Power-over-Ethernet.

Select a midspan manufacturer that designs, manufactures, and tests its own product rather than outsourcing these tasks across the globe to cut costs.

Select a midspan that has a high-speed, common interface to access the management console. A USB port is not as cheap as a serial port (RS-232) but is faster, more user-friendly, and more common on high quality midspans.

Myth Busted: Although there are many midspan manufacturers out there, few have the power supply experience, quality controls, and manufacturing capability to produce best-in-class midspans. All midspans are NOT created equal.

-------------------------------------------------------------------------------------------------

Kondor Security carries a full range of PoE products and midspans from PowerDsine. We're still uploading their product alongside our constant expansion, so if you're interested in midspans or anything else security related, feel free to contact us.


Technorati Profile

5.18.2009

FREE reader from Isonas!

From now until July 31st, ISONAS is offering one free reader with the purchase of 7 readers and an agreement to cooperate with ISONAS on a write-up of the reader application on-site and a few photographs of the installation. It's a win-win: You get a free reader and exposure for your website or facility. Details follow...

Buy 7 or more ISONAS PowerNet™ IP readers in a single order and commit in writing to work jointly with ISONAS to develop a one page write-up to be posted on their website. During this process, you will need to provide a URL of your company website, your company contact who will work with ISONAS on the application write-up, pictures of the installation and description to the following three sub headings.

  • Application:

  • Problem to be solved:

  • Benefits from using the ISONAS system:

ISONAS will then submit a draft of this one page application write up to you for review and approval.

Once you approve of the application write-up and it is posted on the ISONAS website, ISONAS will ship out the free reader.

Because of the number of steps involved, contact us first with any questions you may have.

5.05.2009

New, lower prices on everything Pelco!

That's right, folks. We've dropped our prices on everything Pelco.

From the new Sarix cameras from Pelco, to the standard box cameras and even the power supplies, we've improved pricing on everything.

We aim to be your one stop shop for all things security and access control. It is our hope that these lower Pelco prices show our dedication to providing top quality product at a decent price with exemplary customer service.

Please, come to Kondor Security and browse our catalog. And remember, if you can't find it at first glance, you're more than welcome to contact us.

5.04.2009

Sarix Technology Now Widely Available

Sarix™ technology defines the next generation of video security imaging performance. Engineered and designed exclusively by Pelco, Sarix technology was created for security and IT professionals, by the world leader in video and security systems. For too long, network-based cameras failed to address a number of issues that are critical to security applications. But with Sarix technology, best-in-class imaging science delivers high-definition (HD) resolution, advanced lowlight capabilities, consistent color science, and fast processing power. Sarix puts the next generation of video security imaging performance within reach.

From the standard color boxes to the higher quality day/night cams all the way to the lenses- you can now find the entire line of Sarix technology devices on Kondor Security.

Come by and have a look at our catalog. We're sure to have what you need.

Social Media Tools Could Support Security

source: upi.com

WASHINGTON, April 16 (UPI) -- National Defense University researchers are encouraging the U.S. Defense Department to develop a strategy to use social media to strengthen national security.

Mark Drapeau, National Defense University associate research fellow, said the current piecemeal approach to social-media technologies like Facebook and Twitter by the Defense Department needs to be addressed, Nextgov reported.

Drapeau, who co-authored a study on social media and U.S. national security that is expected to be released by the National Defense University, cited the recent terrorist attacks in India and the speed of critical information reported on the incident through Twitter as evidence of a potential networking power that could also be used to strengthen national security.

Drapeau has called on the Defense Department to develop a comprehensive strategy for utilizing social-media technologies to support U.S. government strategic security objectives.

"It's still important to be aware of the power and reach of these tools," Drapeau said, according to Nextgov.

"If you work in national security, some of these things happening in other countries may affect your job or mission. What's happening over the past couple years is people in other countries are using Facebook, Twitter and blogs to organize. In some cases, even when government security knew it was happening, they were overwhelmed by the amount of people who show up."


© 2009 United Press International, Inc. All Rights Reserved.